Frame: Owing to the common unit frame, offered mowers are able to run under low hanging trees and cut grass do not stick to choke the mowers
Chassis: Unbreakable, reinforced steel, firmly braced by axle and bottom block assembly
Transmission: The cylinder is driven at both ends from road wheels through hardened steel machined cut gears, totally enclosed in oil bath and ratchet drive to facilitate turning. Clutches fitted enables the cylinder to be taken out of gear and helps in transportation
Gear Drive Type: All gears are fitted with bearing for longer life
Cutting Cylinder: Blades running on heavy duty ball bearings
Cutting Ratio: 1. At 08 Kph 1.0 acre per hour / unit 2. At 08 Kph 3.0 acres per hour / 3 unit 3. At 10 Kph 1.4 acres per hour/ unit 4. At 10 Kph 4.2 acres per hour/3 unit. 5. At 16 Kph 2.0 acres per hour / unit 6. At 16 Kph 6.0 acres per hour / 3 unit
Cutting Width: 1.1 unit - 76 cm (2 ft 6in) 2. 3 unit-2.10m (7ft in)
Overall Width: 5.1 unit -1 22m (4 ft 0in) 6. 3 unit-2.59m (8 ft 6in)
Overall Length: 1.1 unit - 81 cm (2 ft 8in) 2. 3 unit-2.59m (8 ft 6in)
Clutch: A Clutch is fitted to each gearbox to engage the drive to the cutting cylinder Carriages: Unbreakable
Adjustment: Cutting height can be adjusted from 1/2 to 8 inches
Cutting Speed Recommended: Depending upon the ground conditions, between 8-16 Kph where conditions are not so good it is recommended to reduce the speed to 5-8 Kph. These are widely used for cutting large areas as public parks, playing fields and golf grounds